E1 Error: Treadmill calibration did not receive a signal for greater than 10 seconds.
Applies to the Following Treadmill Models: XT185, XT285, XT385, XT485, XT685
- Check to ensure that the cables connecting the console and controller are secure. If any of the cables/connectors appear loose, completely power off and unplug the treadmill before unplugging and reattaching the cables. Once all cables have been completely reattached, plug in and turn on the treadmill.
- If the error code is still showing after confirming that the cables are securely connected, check to ensure that the speed sensor is properly located at the front roller. There must be less than 3-5mm of space between the sensor and the front roller. If the speed sensor has been disconnected or dislodged from the front roller, completely power off and unplug the treadmill before unplugging and reattaching the speed sensor. Once the sensor has been completely reattached, plug in and turn on the treadmill.
- If the E1 error code is still showing after confirming that the speed sensor has been properly placed, please submit a ticket here or contact the Spirit Service Department by phone at 800-258-8511 for assistance.
If after troubleshooting you are still unable to resolve your machine's error, please contact the Spirit Service Department and be prepared to provide the following information:
- Your name
- Dealer location
- Date of purchase
- Machine serial number
You can contact the Spirit Service Department by submitting a ticket here or by calling 800-258-8511 for assistance.Service agents are available Monday-Friday from 8:00am - 7:00pm CST.
Just as your treadmill operates to keep you fit and healthy, your treadmill also requires regular care to guarantee that it maintains its functionality. Ensure that your treadmill is cleaned, lubricated, and adjusted regularly to avoid service downtime.
Learn more about treadmill maintenance best practices by visiting the articles below: