Your XT485 comes equipped with four (4) transport wheels (2 front, 2 rear). To transport your treadmill, simply fold and roll.
CAUTION: Do not attempt to move the unit unless it is in the folded and locked position. Remove the power cord from the front of the unit to avoid possible damage. Use both handrails to maneuver the unit to the desired position.
To fold your treadmill:
Ensure the treadmill deck is at minimum incline.
Lift the treadmill running deck until it is secured by the locking telescoping tube assembly in the center back of the base.
To unfold your treadmill:
- With one hand, apply slight forward pressure on the treadmill on the running deck at the rear roller area.
- Pull down on the yellow unlocking lever and slowly lower the running deck to the floor. The deck will lower unassisted when it reaches about waist high.