Your X-Series console has the ability to be programmed to automatically turn off and enter sleep mode after 20 minutes of inactivity. If the sleep mode setting is not enabled or is toggled off, the machine console will remain awake, even when not in use.
To change the current Display Mode settings of your X-Series machine, please follow the steps below:
- Press and hold down the Start, Stop and Enter keys for approximately five (5) seconds to enter Engineering Mode (the console will show "ENGINEERING MODE").
- Press the Enter key to access the Engineering mode menu. Use the arrow keys to scroll through the list of available settings until you land on 'Display Mode.'
- Press the Enter key to select the function and use the arrow keys to toggle the setting on or off.
- When the Display Mode function is set to 'on,' the console will turn off after 20 minutes of inactivity.